Key Takeaways
- Match the Camera Technology to Your Property
Wired PoE systems deliver the best reliability and image quality, while Wi-Fi and battery cameras suit renters or quick, low-disruption installs. The right choice depends on your block size, existing cabling, and how much ongoing maintenance you're willing to take on.
- Resolution and Features Turn Footage Into Usable Evidence
For most Canberra homes, 2K hits the best balance of clarity, storage, and cost, while 4K suits long driveways and street-facing coverage. Smart features like AI person and vehicle detection and colour night vision often matter more than raw megapixels.
- Get a Professional for Cabling, Power, and Compliance
DIY works for simple wireless setups, but a professional install gives you safe power, weatherproof cable runs and camera positions that avoid blind spots. It also helps you stay on the right side of ACT rules: aim cameras at your own property and switch off audio unless everyone recorded has agreed.
- Audio Is the Main Legal Risk in the ACT
Video of your own property is generally fine, but the ACT Listening Devices Act 1992 makes it an offence to record a private conversation without the consent of the people having it. Most homeowners turn the microphone off.
A professional security camera install in Canberra usually means wired PoE cameras on Cat6 cable, run back to a network video recorder (NVR) inside the house, with each camera aimed at your own entries, driveway and yard. Most houses are covered well by four to six cameras. Wireless and battery cameras suit renters and quick installs, but they trade away some reliability.
The ACT rules are simple to follow once you know them. Video of your own property is generally fine. Recording audio is the risky part, because the Listening Devices Act 1992 makes it an offence to record a private conversation without the consent of the people in it. This guide covers the hardware, placement, privacy and what a licensed installer does.
What does a professional security camera install involve in Canberra?
A wired install starts with a walk-around to agree camera positions. Cat6 cable is then run from each camera through the roof space or wall cavities to one central spot, usually a hallway cupboard, study or garage, where the NVR sits. Most NVRs have built-in PoE ports, so each camera gets power and data from that one cable and no power point is needed at the camera. The NVR itself needs a power point and a network connection to your router for phone viewing. Cameras are mounted under eaves on weatherproof junction boxes, each cable entry is sealed, and the system is tested day and night before the job is finished. Our security systems page covers the range of work we do.
How many cameras does a typical Canberra house need?
Most single-storey Canberra houses are covered well by four to six cameras:
- Front door: one camera angled to capture the faces of people at the door (a video doorbell can do this job).
- Driveway and front yard: one camera, ideally 2K or 4K if the driveway is long or you want number plates.
- Side gates: one camera per side access, since this is how people get into back yards unseen.
- Back door and yard: one or two cameras covering the rear entry, patio doors and any shed or garage.
A two-storey house, a large rural block or a detached garage can push that to eight. Start with the entry points and add coverage later; an NVR with spare ports makes that easy.
Where can I point my security cameras in the ACT?
Point cameras at your own property: doors, the driveway, side paths and the back yard. Avoid aiming straight into a neighbour’s windows, yard or outdoor living area, and keep street coverage to what you need to see your own frontage. Most NVRs and camera apps let you set privacy masks, which black out part of the image so a neighbour’s window is never recorded. The OAIC notes that the federal Privacy Act does not cover a camera run by an individual in a private capacity, but territory laws and strata by-laws can still apply. If a neighbour complains, talk first. The ACT Conflict Resolution Service offers free mediation.
Is it legal to record audio on a home security camera in the ACT?
This is where homeowners most often get caught out. The ACT Listening Devices Act 1992 makes it an offence to use a device to record a private conversation unless each principal party to the conversation consents. A camera with a microphone counts as a listening device. That means a front door camera picking up visitors, tradies or neighbours talking can put you in breach, even if the video is fine. Sharing or publishing a recording of a private conversation is a separate offence. The simplest fix is to turn audio recording off in the camera or NVR settings. Two-way talk for deliveries is a different feature, but check that it does not also record.
Does the ACT Information Privacy Act apply to home cameras?
No. The Information Privacy Act 2014 and its Territory Privacy Principles apply to ACT Government agencies and their contractors, not to people filming their own homes. The ACT Government’s privacy page and the OAIC both make this point. So for a house, the practical rules are: keep cameras aimed at your own property, switch audio off, put up a “CCTV in operation” sign if visitors and workers will be filmed, and get permission where you need it. Renters need the landlord’s agreement, and in strata complexes any camera on common property usually needs owners corporation approval under the by-laws.
Which camera technology should I choose?
IP cameras (network CCTV) and NVR systems
Internet Protocol (IP) cameras are now the modern standard for many residential security camera installations. They process video inside the camera and transmit it over a network (Ethernet or Wi‑Fi), typically recording to a Network Video Recorder (NVR).
Why Canberra homeowners like IP systems:
- Strong image quality and upgrade paths (you can add cameras later without rebuilding everything).
- Better integration with apps and remote viewing.
- Support for advanced analytics such as person/vehicle classification and other AI features.
Resolution range matters. IP cameras commonly deliver 1080p, 2K, and 4K options. Higher resolution helps when you need to identify a face or read a licence plate.
PoE cameras (Power over Ethernet)
For many homes, PoE (Power over Ethernet) is the sweet spot because it runs power and data through one Ethernet cable. That simplifies installation and often improves reliability compared to Wi‑Fi-only cameras.
Ethernet runs are good for up to 100 metres of Cat6 between the camera and the NVR or PoE switch, which covers larger blocks, detached garages and long driveways.
What to plan for: IP systems can require more setup than older tech. You may need to configure network settings, secure remote access, and ensure your home network can handle multiple camera streams.
At Fused Electrical Co, we often help homeowners coordinate the “whole system” side: safe power supply, data cabling paths, PoE switching needs, and tidy cable routing that does not create future maintenance issues.
Analog CCTV and HD over Coax
Analog systems use coaxial cables to send video to a Digital Video Recorder (DVR) that converts the footage into recordable digital format.
Analog is not “dead”. It can still make sense if:
- Your home already has coax runs in place.
- You want a simpler, cost-contained upgrade path.
- You are upgrading to HD over Coax, which can deliver higher resolution over existing coax cabling.
Strengths of wired analog/HD over coax:
- Stable connection (no Wi‑Fi dropouts).
- Less exposed to wireless interference and some cybersecurity risks (wired signals are not broadcast through the air).
- Continuous mains power with fewer battery concerns.
Trade-offs:
- More invasive cabling (drilling, roof space runs, wall penetrations).
- Often fewer smart-home integrations than IP.
- Typically requires separate power arrangements.
Wireless security cameras (Wi‑Fi) and battery-powered cameras
Wireless security cameras send footage over Wi‑Fi, and many models can be installed quickly without extensive cabling. Battery-powered cameras add flexibility, particularly for renters or hard-to-cable locations.
Why wireless is popular in Canberra:
- Fast deployment and easy relocation.
- Great for rental properties (when approved) or temporary coverage.
- Minimal drilling, depending on the model.
Limitations to take seriously:
- Wi‑Fi strength and interference can cause dropouts, especially at the far end of a brick house.
- Battery performance drops on frosty Canberra winter nights, and high-traffic areas drain batteries faster.
- Many systems rely on cloud storage subscriptions, which adds ongoing cost over time.
A common pattern: homeowners start with a DIY wireless setup, then move to a wired or hybrid system when they want better uptime, clearer footage and fewer subscriptions.
Camera types and where they work best
Security cameras are not just about resolution. The physical form affects deterrence, vandal resistance, and coverage.
- Bullet cameras: Highly visible and often a strong deterrent. Good for longer views such as driveways and front approaches.
- Dome cameras: Harder to tamper with and less obvious which direction they face. Good for areas where vandalism is a concern.
- Turret cameras: Flexible “ball and socket” style aiming, useful when you need to fine-tune direction after mounting. Less prone to infrared glare than domes.
- Fisheye cameras: Very wide-angle, close to 360-degree coverage, helpful for large rooms or open areas (but can distort detail).
- PTZ (pan-tilt-zoom): Remote-controlled movement and zoom, often better suited to commercial sites or high-security residential use due to cost and complexity.
Resolution in plain terms
Resolution affects whether footage is merely “nice to have” or actually useful evidence:
- 1080p: 1920 × 1080 (about 2.1 million pixels)
- 2K: 2560 × 1440 (about 3.68 million pixels)
- 4K: 3840 × 2160 (about 8.29 million pixels)
Practical guidance for most Canberra homes:
- 1080p is okay for general monitoring and deterrence on a tighter budget.
- 2K is often the best balance of clarity vs storage and cost for residential use.
- 4K is worth considering for long driveways, street-facing coverage, and situations where you may need to zoom in for identification.
Features that matter most
Modern systems are moving beyond “record everything” toward “record what matters”:
- Motion detection and motion zones (reduce useless footage and help with alerts).
- AI detection that can differentiate people, vehicles, and animals (reduces false alarms from kangaroos, cats and swaying trees).
- Facial recognition in more advanced systems (can alert on unknown faces).
- Colour night vision, which can improve identification at night compared to basic infrared-only imagery.
- High dynamic range (HDR) to balance bright and dark areas in one scene, such as a sunny driveway and a shaded porch.
- Two-way audio, which can be useful for deliveries, but see the audio rules above before you record anything.
What affects the cost of a security camera install?
We quote every job at a fixed price after seeing the house, because the same camera count can be a quick job or a long one. The main things that change the price:
- Number and type of cameras, and whether you want 4K or AI detection.
- Cable runs: a single-storey house with good roof access is simpler than a two-storey home, a flat roof or a detached garage that needs cable underground or along a fence.
- Wall type: brick veneer and double brick take more drilling than weatherboard.
- Recorder and storage: a larger hard drive keeps more days of footage.
- Extra power points for the NVR, a video doorbell or floodlights.
- Cloud subscriptions if you choose cameras that need them.
How should cameras be placed and mounted?
Good installation turns a camera from a gadget into a reliable security tool.
Placement rules that work
- Mount outdoor cameras at roughly 2.5 to 3 metres, high enough to resist tampering but low enough to see faces rather than the tops of heads.
- Aim cameras to capture faces at entry points.
- Use corners of the house for broader coverage down both sides.
- Avoid pointing directly into the rising or setting sun, which washes out the image.
- Do a temporary test mount and check day and night footage before final fixing.
Canberra climate considerations
Canberra’s hot summer sun and winter frosts are hard on outdoor electronics. Choose outdoor cameras rated IP65 or higher, mount them under eaves to cut direct sun and rain, and use UV-stable conduit for any exposed cable.
Common mistakes to avoid
- Infrared (IR) reflection off nearby eaves or walls washing out night footage.
- Exposed cabling degrading under UV.
- No system testing until everything is mounted.
- Wasted views pointed at blank walls or sky.
Maintenance
Security cameras are not “set and forget”. Check the system every few months (all cameras recording, correct time stamp, hard drive healthy), clean lenses and housings once a year, keep dust out of the recorder, and recharge or replace batteries before they go flat.
Insurance
Timestamped footage can help support a theft claim. Ask your insurer whether a camera system changes your premium, and keep a note of what you installed and when.
How do I plan a security camera system for my home?
A 7-step plan to choose the right CCTV system in Canberra:
- Define your outcome: deterrence, evidence quality, remote monitoring.
- Map entry points and sightlines: front door, side gates, back door, ground-floor windows.
- Choose wired vs wireless: if you need maximum reliability, lean wired.
- Pick a sensible resolution: 2K is often the best balance.
- Decide on storage: local NVR, cloud, or hybrid approach.
- Plan privacy from day one: avoid filming over boundaries and switch off audio recording.
- Use a professional for the hard parts: cabling, power, weatherproof penetrations.
Talk to a licensed electrician about your security cameras
Fused Electrical Co is a family owned Canberra business based in Calwell, with 35+ years of combined experience between the owners. We are licensed in the ACT (licence 476229C) and work across Canberra and Queanbeyan, including Belconnen, Tuggeranong, Woden, Gungahlin and the inner suburbs.
- Fixed-price quotes: you know the price before we start.
- Quick replies: we respond to quote requests within 24 hours.
- Business hours work: we do not offer an after-hours service.
- Licensed and insured: all electrical work is done to Australian standards.
See our security systems page, or call 0434 913 935 to talk through your home.
Frequently asked questions
Can I point a security camera at my neighbour's property in the ACT?
Aim your cameras at your own property, such as entrances, the driveway and the garden. Filming beyond your boundary into neighbours' areas can raise privacy issues. If a neighbour objects, talk it through first, and the ACT Conflict Resolution Service offers mediation if that does not work.
Is it legal to record audio on a home security camera?
Be cautious. In the ACT, the Listening Devices Act 1992 makes it an offence to record a private conversation unless each person in it consents, so many homeowners disable audio, especially anywhere a conversation could reasonably be captured. Video of your own property is a different matter from recording what people say.
What resolution security camera do I need for my home?
For most Canberra homes, 2K is the best balance of clarity, storage and cost. 4K is worth it for long driveways, street-facing coverage or when you may need to zoom in to identify someone. 1080p is fine for general monitoring on a tighter budget.
Are wired or wireless security cameras better?
Wired PoE cameras give the best reliability and image quality, because power and data run through one cable. Wireless and battery cameras suit renters and hard-to-cable spots, but Wi-Fi dropouts, batteries in cold weather and cloud subscriptions are the trade-offs.
Do I need an electrician to install security cameras?
A simple wireless setup can be a DIY job. Wired systems need safe power, cable runs through walls and eaves, and weatherproof penetrations, which is where a licensed electrician earns their keep. We look after the power and cabling side so the system is tidy and reliable.
Can renters install security cameras in Canberra?
Renters should get the landlord's permission first and consider removable wireless or adhesive cameras. In strata apartments, putting cameras on common property may need strata approval.
Conclusion
A well-planned security camera system is one of the most effective ways to protect your Canberra home, and the gap between a reliable setup and an expensive disappointment comes down to the details: the right technology for your block, a sensible resolution, and cabling, power and weatherproofing done properly. Add the ACT privacy rules, especially around audio, and it is clear why the hard parts are worth handing to a professional. Fused Electrical Co is a licensed ACT electrical business (licence 476229C) based in Calwell, working across Canberra and Queanbeyan. We handle the power and cabling side of camera installs and give you a fixed-price quote. Call 0434 913 935 or send a quote request and we will reply within 24 hours.
Published Date:Last updated:
Link copied!
Talk to a licensed Canberra electrician.
Family owned, rated 5.0 from 165 Google reviews. Serving Canberra, the ACT and Queanbeyan.

Article Sources / Publishing Guidelines
Sources
- legislation.act.gov.au · 1992 57
- legislation.act.gov.au · 2014 24
- cmtedd.act.gov.au · privacy
- oaic.gov.au · what can i do about my neighbour s security camera
- crs.org.au
At Fused Electrical Co, we are committed to publishing content that is accurate, trustworthy, and useful for our readers. To maintain these standards, we follow a rigorous process:
- All content is crafted to be clear, helpful, and regularly updated.
- We adhere to strict practices, including:
Editorial Guidelines
Fact-Check Content
Vet Expert Sources
Content Creation Process - If you have any questions, concerns, or if you’ve found an error in our content, please contact us.



